SSBH Series Side Entry Single Bag Filter Housing
Request a Quote| Item No | Product Name | Description | |
|---|---|---|---|
| SSBH01L01SDN25FM | Side Entry Single Bag Filter Housing | 316L, 1Core, Size 01, NPT, Inlet/Outlet： 1", FKM O-ring, Precise polishing | Request a Quote |
| SSBH01L02SDN40FM | Side Entry Single Bag Filter Housing | 316L, 1Core, Size 02, NPT, Inlet/Outlet： 1.5", FKM O-ring, Precise polishing | Request a Quote |
| SSBH01L04SDN25FM | Side Entry Single Bag Filter Housing | 316L, 1Core, Size 04, NPT, Inlet/Outlet： 1", FKM O-ring, Precise polishing | Request a Quote |
| SSBH01S02SG2EM | Side Entry Single Bag Filter Housing | 304 SS, 1Core, Size 02, NPT, Inlet/Outlet： 2", EPDM O-ring, Precise polishing | Request a Quote |
Description
SSBH series side entry bag filter housing is a kind of pressure type filter device, which mainly consists of three parts: filter housing, filter basket andfilter bag, with compact and simple structure. The liquid to be filtered enters through the inlet of the filter housing, flows through the filter bag, and flows out from the outlet of the filter housing after being intercepted by the filter
bag. The inlet and outlet design adopts side-in and bottom-out mode, which is convenient for cleaning. Different removal ratings dependon the filter bags of different precision. This product is very suitable for filtration occasions with demanding cleanliness requirements such as bio-pharmaceuticals, food and beverage fine chemicals,etc.
Characteristics and Advantages
- The outer surface of the housing is sandblasted or mirror polished, which is easy to clean
- Compactfilter structure, simple andconvenient installation and operation, small footprint
- Sealed by O-elastomer sealing shell, easy to fasten and durable
- Stainless steel feet support, corrosion resistant, adjustable height, easy to install on site
Specification
| Connection | Body Connection | Swing Bolt |
| Inlet and Outlet | Tri-clamp, Flange, Thread | |
| Vent | Thread | |
| Drain | Thread | |
| Material | Housing Body | 304, 316L |
| Eyebolt | 304 | |
| Feet Support | 304 | |
| Sealing Material | Silicone Rubber, Viton, EPDM | |
| Surface Polishing Treatment |
Polish Type | Mechanical polishing, Sandblasting |
| Surface Option | Internal Ra:≤0.6μm, External Ra:≤0.8μm | |
| Operating Conditions |
Design Pressure | 1.0 Mpa |
| Operating Temperature | 130℃ |
*Specific configuration parameters can be customized according to customer requirements
Drawings and Dimensions
Ordering Information
| Number of Filters |
Material | Filter bag model |
Inlet and Outlet Types |
Inlet /Outlet Size |
Sealing | Surface Polishing Treatment |
|
| SSBH SSBH II |
01=1 bag | S=304ss L=316L |
01=Bag 1 02=Bag 2 |
K=Tri-clamp F=Flange S=Thread |
DN25 DN40 DN50 N16=2"NPT T8=1"BSPT T12=1.5"BSPT |
S=Silicone F=FKM E=EPDM |
MI=Mechanical Polishing (Industrial grade) C=Internal Polishing and External Sandblasting |
SSBH：Water outlet on the side
SSBH II：Water outlet is at the bottom
入式的多袋過濾器1_proc.jpg)