-
Syringe Filter
/
Membrane
-
Read MoreMS Hydrophilic Nylon Membrane
Membrane Solutions Nylon membrane has natural hydrophilic characteristics and excellent chemical performance that it can be used to filter most organic solvent, such as alcohols / hydrocarbons / ethers / esters / ketone / benzene, remove micron-structured particles and baterial in all kinds of aqueous solutions and majority solvent solutions
-
Read MoreMS Positively Charged Nylon Membrane
The positively charged nylon membrane produced by MS is made of nylon membrane with strong positive charge after surface treatment. Through the pore size screening and positive adsorption of nylon membrane, it has extremely high separation efficiency and can absorb substances with intercepting size much smaller than the pore size of the membrane, lt is widely used to remove impurities such as internal toxins, bacteria, viruses, and fine particles.
-
Read MoreMS Hydrophilic PES Membrane
Membrane Solutions polyethersulfone (PES) membranes are produced using a unique process, and compared to other membrane varieties, PES membranes have very good water wettability, so PES membranes have extremely high water flux. PES membranes exhibit very low protein adsorption capacity and are widely used in sterilization and filtration of liquids and filtration and clarification in food, medicine and other fields.
-
Read MoreMS Hydrophilic PTFE Membrane
The hydrophilic PTFE membrane provided by MS includes hydrophilic composite membrane and hydrophilic pure membrane. Among them, the hydrophilic composite membrane is made by thermal coating ePTFE membrane with PP, PET and other non-woven fabrics, and then by surface hydrophilic treatment technology. Hydrophilic PTFE membrane, free of binder and soluble substances, has high peel strength, excellent and stable hydrophilicity, low protein adsorption, and is widely used in the filtration of aqueous solutions.
-
Read MoreMS Oleophobic PTFE Membrane for Venting
The hydrophobic and oleophobic PTFE membrane has strong hydrophobic and oleophobic performance, which can prevent the penetration of pollutants with low surface tension, including detergent, oil and chemicals. The oleophobic test is conducted according to The American Association of Textile Chemists and Colorists (AATCC)118-1989 standard. The test method is to drop the liquid with known surface tension on the surface of the membrane material and observe the wetting condition. This process is the process of liquid entering the membrane structure. The oleophobic grade is the liquid that cannot wet the minimum surface tension of the membrane material.
-
Read MoreMS Hydrophilic PVDF Membrane
Membrane Solutions offers an unsupported PVDF membrane that is inherently hydrophilic. It is made by a unique phase inversion process, creating an asymmetric pore structure for superior flow rates and dirt holding capacities. MS hydrophilic PVDF membranes are ideal for low protein binding requirements when filtering aqueous solutions.
-
Read MorePTFE Hydrophobic Membrane for Venting
The PTFE venting membrane provided by Membrane Solutions has strong hydrophobicity, and the gas can pass through while aqueous liquids are blocked. It is widely used in medicine, cycling industry and other system protection. Now we provide three kinds: without support, PP support, PET support for your choice.
-
Read MoreMS Hydrophobic PES Membrane
Membrane Solutions Hydrophobic PES Membrane is prepared by hydrophobic modification process of sterilizing grade PES hydrophilic membrane, which is specially designed for rapid air filtration or sterilization ventilation, and it can also prevent liquid penetration or condensate clogging. Compared to traditional gas filtration media, PES hydrophobic membranes are resistant to Gamma irradiation and have virtually no change in mechanical properties after high-dose irradiation, making them particularly suitable for air sterilization applications that require irradiation sterilization.
-
Read MoreMS Hydrophilic Pure Nylon Membrane
Nylon membrane is one of the most widely used membranes in the pre-treatment stage of sample chemical analysis. Nylon membranes on the market are mainly sandwich coated with a support layer, including Memmbrane Solutions Nylon membrane. Now, Membrane Solutions has also developed a kind of pure Nylon membrane, which is composed of pure nylon 6 without a support layer. It overcomes the leaching problem caused by the support layer of traditional Nylon membranes in chromatographic applications, while also possessing the good chemical stability and solvent tolerance(including DMSO) of traditional nyon membranes. It can effectively filter aqueous solutions, dilute acid-base solutions, and most organic solvents, and is used for the removal and detection of particles, bacteria, colloids, microorganisms, foreign imimpurities, etc.In addition, the pore structure of Pure Nylon membrane belongs to an asymmetric structure with high porosity, which gives it higher flow rate and pollutant absorption performance, makong it suitable for pre-filtration of viscous and high particle content samples.