MS LinePure Pleated Filter Cartridge with High Flow
MS InnerPure cartridge filter is a replacement cartridge for conventional depth filters. Up to 1300 LPM flow rate per 40inch length filter reduces the number of filter cartridges and cost of housing required. Pleated construction with an outside to inside flow provides maximum flow rates with the lowest possible pressure drop. Because of the larger filter area, you can achieve significantly increased filter life and fewer filter change-outs, saving cartridge costs and labor.
Full Description
Online Ordering
暫無(wú)選擇項(xiàng)
Please Select a Item
Applied filters:
| Specs | Product | Optional Parameters | Availability | Operate |
|---|
Related Documents
Features
- Absolute beta 5000 efficiency
- Enable consistent particle removal with high dirt capacity
- Proprietary o-ring seal
- Multi layer pleated construction with optimized surface area
- Outside-in flow provides maximum flow rates
- Thermally bonded construction
- FDA listed materials of construction
Applications
- Water treatment
- Sea water and brackish water
- The filtration of bottled water, soft drinks and other beverage
- Microelectronics process water
- Pharmaceutical/Cosmetics
- Biotechnology/Fine chemicals
Technical Parameters
| Materials of Construction | Filter Material | Pleated Polypropylene |
| Inner Core | Polypropylene | |
| End Cap | Polypropylene | |
| O-ring | NBR, Viton | |
| Filter Dimensions | Outer Diameter | 6.75"（171mm） |
| Length | 60"（1524mm） | |
| Filtration Area | 7.5m2@40" | |
| Recommended Performance Parameters | Maximum Operating Temperature | Deep pleated polypropylene：80℃ |
| Maximum Operating Pressure | Deep pleated polypropylene：3.4 bar@80℃ | |
| Recommended pressure difference for filter cartridge replacement | 2.4 bar@20℃ | |
| Flow Direction | Outside to Inside |
FAQ