BiopureTM Syringe Filter
Request a QuoteBiopureTM Syringe Filter Introduction
MS BiopureTM Syringe Filter provides a high throughput sample filtration method withinnovative connection way (Individual or Assembled). The Membrane filters are available for 33 mm syringe filters in 0.2µm and 0.45µm. The range of membranecoversall common membrane, such as Nylon, PTFE, PES, MCE and PVDF etc
.
Features and Benefits
- Larger filtration areas: High Sample Throughput
- More firm connection: Luer Lock Male/Female
- Higher Operating temperature: Polycarbonate housing material tolerates up to 110℃ with PTFE membrane, up to 90℃ with PVDF membrane
- Sterile: Pre-sterilized by Gamma radiation and individually packaged can be offered.
Application
- Food safety monitoring
- Environmental pollution monitoring
- HPLC sample preparation
- Routine QC analysis
- Removal of protein precipitates
- Content uniformity
Technical Specifications
| Parameters | 33mm | |
| Housing material | PC(Polycarbonate) | |
| Effective Filtration area (cm2 ) | 5 | |
| Pore Size (μm) | 0.22 | 0.45 |
| Holdup volume (μl) | ＜200 | |
| Sample volume (ml) | 150 | |
| Inlet connection | Female luer lock | |
| Outlet connection | Male luer lock | |
| Maximum Operating Temperature | PVDF: 110 PVDF: 90 NY: 90 PES: 80 MCE: 80 | |
| Maximum Operating Pressure | 87MPa | |